Executive Summary: Three-Wheeler Charging Station for Global Buyers
Bottom line For tuk-tuk ranks, the WL-TK3 pairs 48V, 60V or 72V output with QR and coin metered billing and an overnight auto cut-off. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. Measured result with landed cost at 38% under the branded alternative at the same retail point for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Cebu Condo Management Buyer Sourcing Success
A sourcing visit that began with a spreadsheet ended with a field trial. The margin squeeze in the category pushes buyers toward factory-direct programs with type-test evidence.
Once the first 200 charging sessions reported back, Jose Santos selected Wanlin as their EV charging manufacturing partner. What closed the deal was not the unit price but the OCPP conformance log in the appendix.
- SMT lines run three shifts and every charging board gets an automated function test before enclosure
- CE, RoHS and IEC 61851-1 documentation ships with every commercial order
- Branded cabinets, multilingual manuals, spare kits and QR decals are handled by the same production team
Standing in the depot, the buyer ran a full 12-port load while the site breaker held and the display cycled port statuses.
Problem Analysis & Field Report: Why Global Buyers Need Three-Wheeler Charging Station
A single customer complaint exposed a pattern the team had not connected. A rickshaw co-op documented melted plugs after drivers forced scooter-style connectors onto heavier tuk-tuk inlet cables.
Field case: A rickshaw co-op in Cebu standardized on the WL-TK3 after melted plugs on forced connectors. Heavy-duty sockets matched to the pack inlet ended the melting, and the co-op fleet downtime fell by half within a month.
Why it matters for global buyers:
- three-wheeler packs draw full current for hours, not minutes
- the fix was multi-stage curves, heavy-duty sockets and per-socket fuses
- per-kWh metering ends flat-rate billing disputes at ranks
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin Three-Wheeler Charging Station
Under the enclosure, the design separates metering from switching so readings stay stable at full load.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Output | 48V, 60V or 72V DC configurable |
| Charging Curve | multi-stage curve for lead-acid and lithium packs |
| Ports | 3 heavy-duty sockets with per-port meters |
| Safety | per-port fuse, overheat sensor and fire-retardant cable |
| Housing | IP54 steel pedestal with IK10 rating |
| Billing | per-kWh metering with QR or coin options |
| Display | port status LEDs and kWh counter per socket |
| Installation | pedestal mount with anchor bolts and cable trench entry |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Tuk-tuk rank charging post | WL-TK3 | Drivers pay per kWh instead of flat overnight fees |
| Rickshaw co-op yard | WL-TK3 | Heavy-duty sockets match the pack inlet without adapters |
| Market loading zone | WL-TK3 | Cargo three-wheelers top up between loads on metered sockets |
| Temple parking area | WL-TK3 | Quiet overnight charging with auto cut-off at full charge |
| School gate stand | WL-TK3 | Parent three-wheelers charge safely behind per-port fuses |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- SMT lines run three shifts and every charging board gets an automated function test before enclosure
- CE, RoHS and IEC 61851-1 documentation ships with every commercial order
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
Against the three suppliers shortlisted, the deciding rows were reliability data and response speed.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
The workflow below is the same one every Wanlin OEM order follows, from sample to dock. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
The notes below are from follow-up calls after the first containers sold through.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "My installer wanted fast commissioning for condo jobs. QR provisioning set each station up in minutes."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "The cabinet survived a monsoon season on an open shed wall. That story sold more units than our ads did."
- Jose Santos (Condo Management Buyer, Cebu, Philippines): "The first article matched the approved sample on meter accuracy, finish and weight. That almost never happens."
Frequently Asked Questions
Q: What voltages does the WL-TK3 support?
A: 48V, 60V or 72V DC configurations, matched to the pack the fleet actually runs.
Q: Does it suit both lead-acid and lithium packs?
A: Yes, multi-stage curves switch by profile so both chemistries charge correctly.
Q: Why only three sockets?
A: Three-wheeler packs draw heavy current for hours; three sockets keep the feeder, fuses and cables inside their ratings.
Q: How do drivers pay?
A: Per-kWh billing through QR wallet, or a coin option for cash ranks.
Q: Is the cable fire-safe?
A: Fire-retardant cable, per-port fuses and an overheat sensor are standard.
Project Summary
Measured result By working directly with manufacturer Wanlin, the Condo Management Buyer team in Cebu reached 38% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China